<?xml version="1.0" encoding="UTF-8"?><metadata xml:lang="en">
<Esri>
<CreaDate>20251205</CreaDate>
<CreaTime>13442900</CreaTime>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISProfile>INSPIRE</ArcGISProfile>
<DataProperties>
<itemProps>
<imsContentType Sync="TRUE" export="False">002</imsContentType>
<itemName Sync="FALSE">view_sg_intermediatezone_2011_bdry</itemName>
<nativeExtBox>
<westBL Sync="TRUE">5513.000000</westBL>
<eastBL Sync="TRUE">470323.000000</eastBL>
<southBL Sync="TRUE">530252.800000</southBL>
<northBL Sync="TRUE">1220301.500000</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_OSGB_1936</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Meter (1.000000)</csUnits>
<projcsn Sync="TRUE">British_National_Grid</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/3.5.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;British_National_Grid&amp;quot;,GEOGCS[&amp;quot;GCS_OSGB_1936&amp;quot;,DATUM[&amp;quot;D_OSGB_1936&amp;quot;,SPHEROID[&amp;quot;Airy_1830&amp;quot;,6377563.396,299.3249646]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Transverse_Mercator&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,400000.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,-100000.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-2.0],PARAMETER[&amp;quot;Scale_Factor&amp;quot;,0.9996012717],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,49.0],UNIT[&amp;quot;Meter&amp;quot;,1.0],AUTHORITY[&amp;quot;EPSG&amp;quot;,27700]]&lt;/WKT&gt;&lt;XOrigin&gt;-5220400&lt;/XOrigin&gt;&lt;YOrigin&gt;-15524400&lt;/YOrigin&gt;&lt;XYScale&gt;10000&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;10000&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.001&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;27700&lt;/WKID&gt;&lt;LatestWKID&gt;27700&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<scaleRange>
<minScale>50000</minScale>
<maxScale>5000</maxScale>
</scaleRange>
<ModDate>20251205</ModDate>
<ModTime>13454200</ModTime>
<SyncOnce>FALSE</SyncOnce>
<SyncDate>20251205</SyncDate>
<SyncTime>13442900</SyncTime>
</Esri>
<dataIdInfo>
<idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;Intermediate zones are a statistical geography that sit between data zones and local authorities, created for use with the Scottish Neighbourhood Statistics (SNS) programme and the wider public sector. Intermediate zones are used for the dissemination of statistics that are not suitable for release at the data zone level because of the sensitive nature of the statistic, or for reasons of reliability. Intermediate Zones were designed to meet constraints on population thresholds (2,500 - 6,000 household residents), to nest within local authorities (at the time of the Census), and to be built up from aggregates of data zones. Intermediate zones represent a relatively stable geography that can be used to analyse change over time, with changes only occurring after a Census. &lt;/SPAN&gt;&lt;SPAN&gt;This dataset represents the i&lt;/SPAN&gt;&lt;SPAN&gt;ntermediate zones&lt;/SPAN&gt;&lt;SPAN&gt; that&lt;/SPAN&gt;&lt;SPAN&gt; &lt;/SPAN&gt;&lt;SPAN&gt;were created following the &lt;/SPAN&gt;&lt;SPAN&gt;2011 Census, &lt;/SPAN&gt;&lt;SPAN&gt;with &lt;/SPAN&gt;&lt;SPAN&gt;1,279 intermediate zones&lt;/SPAN&gt;&lt;SPAN&gt; &lt;/SPAN&gt;&lt;SPAN&gt;covering the whole of Scotland.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
<idCitation>
<resTitle>2011 Intermediate Zone Boundaries</resTitle>
<date>
<pubDate>2014-11-06T00:00:00</pubDate>
<reviseDate>2021-10-04T00:00:00</reviseDate>
</date>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
<citId>
<identCode>SG_IntermediateZone_2011_Bdry</identCode>
</citId>
<resAltTitle>2011 Intermediate Geographies</resAltTitle>
</idCitation>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<westBL Sync="TRUE">-9.229868</westBL>
<eastBL Sync="TRUE">-0.705303</eastBL>
<northBL Sync="TRUE">60.866111</northBL>
<southBL Sync="TRUE">54.513372</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
<geoEle>
<GeoDesc>
<geoId>
<identCode>http://statistics.gov.scot/id/statistical-geography/S92000003</identCode>
</geoId>
<exTypeCode>1</exTypeCode>
</GeoDesc>
</geoEle>
<geoEle>
<GeoDesc>
<geoId>
<identCode>GB-SCT</identCode>
<identAuth>
<resTitle>ISO 3166 — Codes for the representation of names of countries and their subdivisions</resTitle>
<date>
<reviseDate>2022-11-29T00:00:00</reviseDate>
</date>
<citOnlineRes>
<linkage>https://www.iso.org/obp/ui/#iso:code:3166:GB</linkage>
</citOnlineRes>
</identAuth>
</geoId>
<exTypeCode>1</exTypeCode>
</GeoDesc>
</geoEle>
<tempEle>
<TempExtent>
<exTemp>
<TM_Instant>
<tmPosition>2011-03-27T00:00:00</tmPosition>
</TM_Instant>
</exTemp>
</TempExtent>
</tempEle>
</dataExt>
<idPoC>
<rpOrgName>Scottish Government</rpOrgName>
<rpPosName>Geospatial Team</rpPosName>
<rpCntInfo>
<cntAddress addressType="postal">
<eMailAdd>GIS@gov.scot</eMailAdd>
<delPoint>Victoria Quay</delPoint>
<city>City of Edinburgh</city>
<adminArea>Scotland</adminArea>
<postCode>EH6 6QQ</postCode>
<country>GB</country>
</cntAddress>
<cntOnlineRes>
<linkage>https://www.gov.scot/</linkage>
<protocol>WWW:LINK-1.0-http--link</protocol>
</cntOnlineRes>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
<rpIndName>GIS Analyst</rpIndName>
</idPoC>
<idPoC>
<rpIndName>Statistician</rpIndName>
<rpOrgName>Scottish Government</rpOrgName>
<rpPosName>Office of the Chief Statistician</rpPosName>
<role>
<RoleCd value="007"/>
</role>
<rpCntInfo>
<cntAddress addressType="postal">
<eMailAdd>statistics.enquiries@gov.scot</eMailAdd>
<delPoint>Victoria Quay</delPoint>
<city>City of Edinburgh</city>
<adminArea>Scotland</adminArea>
<country>GB</country>
</cntAddress>
<cntOnlineRes>
<linkage>https://www.gov.scot/</linkage>
<protocol>WWW:LINK-1.0-http--link</protocol>
</cntOnlineRes>
</rpCntInfo>
</idPoC>
<searchKeys>
<keyword>Population distribution</keyword>
<keyword>Statistical data</keyword>
<keyword>Statistical analysis</keyword>
<keyword>Statistical units</keyword>
</searchKeys>
<themeKeys>
<thesaName>
<resTitle>GEMET - INSPIRE themes, version 1.0</resTitle>
<date>
<pubDate>2008-06-01T00:00:00</pubDate>
</date>
<citOnlineRes>
<linkage>http://www.eionet.europa.eu/gemet/inspire_themes</linkage>
</citOnlineRes>
</thesaName>
<keyword>Statistical units</keyword>
</themeKeys>
<themeKeys>
<thesaName>
<resTitle>GEMET - Concepts, version 4.2.3</resTitle>
<date>
<pubDate>2008-06-01T00:00:00</pubDate>
</date>
<citOnlineRes>
<linkage>https://www.eionet.europa.eu/gemet/en/themes/</linkage>
</citOnlineRes>
</thesaName>
<keyword>population distribution</keyword>
<keyword>statistical data</keyword>
</themeKeys>
<themeKeys>
<thesaName>
<resTitle>IPSV Subjects List</resTitle>
<date>
<pubDate>2008-06-01T00:00:00</pubDate>
</date>
<citOnlineRes>
<linkage>https://standards.esd.org.uk/</linkage>
</citOnlineRes>
</thesaName>
<keyword>Statistical analysis</keyword>
</themeKeys>
<idPurp>Intermediate zones are used for the dissemination of statistics that are not suitable for release at the data zone level because of the sensitive nature of the statistics, or for reasons of reliability.</idPurp>
<idCredit>© Scottish Government, contains Ordnance Survey data © Crown copyright and database right 2021.</idCredit>
<resConst>
<LegConsts>
<inspireAccessUseConditions>
<ConditionsAccUseCd value="001"/>
</inspireAccessUseConditions>
</LegConsts>
</resConst>
<resConst>
<LegConsts>
<inspirePublicAccessLimits>
<PublicAccessCd value="001"/>
</inspirePublicAccessLimits>
</LegConsts>
</resConst>
<resConst>
<LegConsts>
<accessConsts>
<RestrictCd value="008"/>
</accessConsts>
<useConsts>
<RestrictCd value="008"/>
</useConsts>
<othConsts>The following attribution statement must be used to acknowledge the source of the information: Copyright Scottish Government, contains Ordnance Survey data © Crown copyright and database right [insert year].</othConsts>
</LegConsts>
</resConst>
<resConst>
<Consts>
<useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;Available under the terms of the &lt;/SPAN&gt;&lt;A href="https://www.nationalarchives.gov.uk:443/doc/open-government-licence/" STYLE="text-decoration:underline;"&gt;&lt;SPAN&gt;Open Government Licence&lt;/SPAN&gt;&lt;/A&gt;&lt;SPAN&gt;. The following attribution statement must be used to acknowledge the source of the information: © Scottish Government, contains Ordnance Survey data © Crown copyright and database right [insert year].&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Dataset is complete for Scotland. Care should be taken when using this dataset with lookups to other postcode based geographies. Some postcode unit boundaries have changed since intermediate zones were created and therefore exact match of the boundaries are unlikely.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
</Consts>
</resConst>
<dataLang>
<languageCode value="eng"/>
<countryCode Sync="FALSE" value="GB"/>
</dataLang>
<dataChar>
<CharSetCd value="004"/>
</dataChar>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataScale>
<equScale>
<rfDenom>10000</rfDenom>
</equScale>
</dataScale>
<envirDesc Sync="FALSE">Esri ArcGIS 13.5.3.57366</envirDesc>
<resMaint>
<maintFreq>
<MaintFreqCd value="011"/>
</maintFreq>
</resMaint>
<tpCat>
<TopicCatCd value="003"/>
</tpCat>
<tpCat>
<TopicCatCd value="016"/>
</tpCat>
</dataIdInfo>
<mdLang>
<languageCode value="eng"/>
<countryCode Sync="TRUE" value="GBR"/>
</mdLang>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<mdFileID>389787c0-697d-4824-9ca9-9ce8cb79d6f5</mdFileID>
<mdChar>
<CharSetCd value="004"/>
</mdChar>
<mdDateSt Sync="TRUE">20251205</mdDateSt>
<mdContact>
<rpOrgName>Scottish Government</rpOrgName>
<rpPosName>Geospatial Team</rpPosName>
<rpCntInfo>
<cntAddress addressType="postal">
<eMailAdd>GIS@gov.scot</eMailAdd>
<delPoint>Victoria Quay</delPoint>
<city>City of Edinburgh</city>
<adminArea>Scotland</adminArea>
<postCode>EH6 6QQ</postCode>
<country>GB</country>
</cntAddress>
<cntOnlineRes>
<linkage>https://www.gov.scot/</linkage>
<protocol>WWW:LINK-1.0-http--link</protocol>
</cntOnlineRes>
</rpCntInfo>
<displayName>Scottish Government</displayName>
<role>
<RoleCd value="007"/>
</role>
<rpIndName>GIS Analyst</rpIndName>
</mdContact>
<dqInfo>
<dqScope>
<scpLvl>
<ScopeCd value="005"/>
</scpLvl>
</dqScope>
<dataLineage>
<statement>The Intermediate Zone geography was first created for use within the Scottish Neighbourhood Statistics (SNS) programme to sit between the data zone and Local Authority geographies and used when statistics are not suitable for release at the data zone level because of the sensitive nature of the statistics or for reasons of reliability. This original dataset (built from 2001 Data Zones) was created by St. Andrews University in 2005 on behalf of the Scottish Government – a detailed methodology can be found at http://www.scotland.gov.uk/library5/society/snsigbi-00.
asp. Intermediate zone boundaries are managed by the Scottish Government's Geographic Information Science and Analysis Team (GI-SAT), who carry out any required updates at the request of the Office of the Chief Statistician and Performance (OCSP).
Following a consultation in 2010, it was decided that the 2001 Data and Intermediate Zone boundaries would be updated to reflect the results of the 2011 Census. The aim was to maintain the link with current Census data, to re-align to Local Authority boundaries (at the time of the Census), and to account for changes in population while keeping boundaries relatively comparable to those created for 2001. The criteria used in the definition of 2011 Intermediate Zones were:
• That they be built up from 2011 Data Zones;
• Maintain approximately equal resident populations of 2,500 to 6,000 people, with an absolute minimum of 2,125 people and a maximum population of 6,375;
• Be a continuous area without multiple extents, unless caused by water (e.g. intermediate zones including islands);
• Maintain a compactness of shape.
Following the consultation with Local Authorities on 2011 Data Zone boundaries, a first cut of intermediate zones were created using the aggregates of updated data zone boundaries, best-fit to 2001 Intermediate Zones.
Similar to the method used to update data zones, the resident population was summed for each 'best-fit' intermediate zone to assess whether it fell within the required population thresholds. Intermediate zones that had seen a dramatic increase in population to values greater than 6,375 were split into one or more new intermediate zones. Conversely, those that had populations below 2,125 were also modified to conform to the population thresholds. From the consultation responses, proposed changes were not always in the form of clear splits and merges, but in most cases a slight re-configuration of the boundaries (i.e. moving a particular data zone from one intermediate zone to another). Many responses requested that intermediate zones respect settlement boundaries as far as possible. Updates to intermediate zones were a largely manual process.
The finalised set of boundaries consists of 1,279 intermediate zones. Each 2011 Intermediate Zone has been given a new unique code, following the Scottish Government’s standard naming and coding convention. The Intermediate Zone 2011 codes range from S02001236 to S02002514 (the previous 2001 codes ranged from S02000001 to S02001235). Census 2011 total, resident and household counts have been summed for each intermediate zone and included in the attribute table. Standard area measurements in hectares and square kilometres have also been attached, calculated from Census Output Area totals. This follows the Office for National Statistics (ONS) Standard Area Measurement methodology, as agreed in 2005. This was done to ensure that total areas remained consistent when comparing geographies. For more information on ONS Standard Area Measurement, please see http://www.ons.gov.uk/ons/guide-method/geography/products/other/uk-standard-area-measurements--sam-/index.html.
Note that the intermediate zones nested exactly into Local Authorities at the time of the Census. However, the intermediate zone boundaries are not updated to reflect any changes made to Local Authority boundaries in-between Censuses.</statement>
</dataLineage>
<report type="DQDomConsis">
<measResult>
<ConResult>
<conSpec>
<resTitle>COMMISSION REGULATION (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services</resTitle>
<date>
<pubDate>2010-12-08T00:00:00</pubDate>
</date>
</conSpec>
<conExpl>Not conformant.</conExpl>
<conPass>0</conPass>
</ConResult>
</measResult>
</report>
</dqInfo>
<distInfo>
<distTranOps>
<onLineSrc>
<linkage>https://maps.data.gov.scot/arcgis/services/IntermediateZones2011/MapServer/WMSServer?</linkage>
<protocol>OGC:WMS</protocol>
<orName>2011 Intermediate Zone Boundaries</orName>
<orDesc>OGC View Service</orDesc>
<orFunct>
<OnFunctCd value="002"/>
</orFunct>
</onLineSrc>
<onLineSrc>
<linkage>https://maps.data.gov.scot/arcgis/services/IntermediateZones2011/MapServer/WFSServer?</linkage>
<protocol>OGC:WFS</protocol>
<orName>2011 Intermediate Zone Boundaries</orName>
<orDesc>OGC Feature Download</orDesc>
<orFunct>
<OnFunctCd value="001"/>
</orFunct>
</onLineSrc>
<onLineSrc>
<linkage>https://maps.data.gov.scot/arcgis/rest/services/IntermediateZones2011/MapServer/1</linkage>
<protocol>ESRI:REST</protocol>
<orDesc>ESRI REST Service</orDesc>
<orFunct>
<OnFunctCd value="001"/>
</orFunct>
</onLineSrc>
<onLineSrc>
<linkage>https://maps.data.gov.scot/arcgis/rest/services/IntermediateZones2011/OGCFeatureServer/1</linkage>
<protocol>OGC-API Features</protocol>
<orDesc>OGC Features API</orDesc>
<orFunct>
<OnFunctCd value="001"/>
</orFunct>
<orName>IntermediateZones2011Boundaries</orName>
</onLineSrc>
<onLineSrc>
<linkage>https://maps.data.gov.scot/shapefiles/SG_IntermediateZone_2011_Bdry_2021-10-04.zip</linkage>
<protocol>WWW:DOWNLOAD-1.0-http--download</protocol>
<orDesc>ESRI Shapefile Download</orDesc>
<orFunct>
<OnFunctCd value="001"/>
</orFunct>
</onLineSrc>
</distTranOps>
<distFormat>
<formatName>WMS</formatName>
<formatVer>1.3.0</formatVer>
</distFormat>
<distFormat>
<formatName>WFS</formatName>
<formatVer>2.0.0</formatVer>
</distFormat>
<distFormat>
<formatName>ESRI REST</formatName>
<formatVer>1.0</formatVer>
</distFormat>
<distFormat>
<formatName>OGC Features API</formatName>
<formatVer>1.0</formatVer>
</distFormat>
<distFormat>
<formatName>ESRI Shapefile</formatName>
<formatVer>1.0</formatVer>
</distFormat>
</distInfo>
<refSysInfo>
<RefSystem dimension="">
<refSysID>
<identCode code="OSGB 1936 / British National Grid (EPSG:27700)"/>
<idCodeSpace>EPSG</idCodeSpace>
<idVersion>7.4</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<mdMaint>
<maintFreq>
<MaintFreqCd value="009"/>
</maintFreq>
</mdMaint>
<eainfo>
<detailed Name="view_sg_intermediatezone_2011_bdry">
<enttyp>
<enttypl Sync="FALSE">2011 Intermediate Zone Boundaries</enttypl>
<enttypd>2011 Intermediate Zone Boundaries</enttypd>
<enttypds>Scottish Government</enttypds>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">1279</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">objectid</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE</attrlabl>
<attalias Sync="TRUE">shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">izcode</attrlabl>
<attalias Sync="TRUE">izcode</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Nine character alpha-numeric code of the Intermediate Zone as listed in the Scottish Register of Geographic Codes.</attrdef>
<attrdefs>Scottish Government</attrdefs>
</attr>
<attr>
<attrlabl Sync="TRUE">izname</attrlabl>
<attalias Sync="TRUE">izname</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">255</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Official name of the Intermediate Zone as listed in the Scottish Register of Geographic Codes.</attrdef>
<attrdefs>Scottish Government</attrdefs>
<attrdomv>
<udom>Names recorded in the Scottish Register of Geographic Codes are normally those defined in legislation, if applicable to that geography.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">totpop2011</attrlabl>
<attalias Sync="TRUE">totpop2011</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Total population of the Intermediate Zone at 2011 Census.</attrdef>
<attrdefs>Scottish Government</attrdefs>
<attrdomv>
<udom>Total population of the Intermediate Zone at 2011 Census.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">hhrespop2011</attrlabl>
<attalias Sync="TRUE">hhrespop2011</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">hhcnt2011</attrlabl>
<attalias Sync="TRUE">hhcnt2011</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Household count of the Intermediate Zone at 2011 Census.</attrdef>
<attrdefs>Scottish Government</attrdefs>
<attrdomv>
<udom>Household count of the Intermediate Zone at 2011 Census.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">stdareaha</attrlabl>
<attalias Sync="TRUE">stdareaha</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
<attrdef>Standard Area Measurement (SAM) in hectares.</attrdef>
<attrdefs>Scottish Government</attrdefs>
<attrdomv>
<udom>Positive real numbers representing the area, in hectares, calculated from Census Output Area totals. This follows the Office for National Statistics (ONS) Standard Area Measurement methodology, as agreed in 2005, which ensures that total areas remain consistent when comparing geographies.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">stdareakm2</attrlabl>
<attalias Sync="TRUE">stdareakm2</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
<attrdef>Standard Area Measurement (SAM) in square kilometres.</attrdef>
<attrdefs>Scottish Government</attrdefs>
<attrdomv>
<udom>Positive real numbers representing the area, in square kilometres, calculated from Census Output Area totals. This follows the Office for National Statistics (ONS) Standard Area Measurement methodology, as agreed in 2005, which ensures that total areas remain consistent when comparing geographies.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">st_area(shape)</attrlabl>
<attalias Sync="TRUE">st_area(shape)</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Area measurement</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>System calculated area of the feature.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">st_perimeter(shape)</attrlabl>
<attalias Sync="TRUE">st_perimeter(shape)</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef>Perimeter measurement</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>System calculated perimeter of the feature.</udom>
</attrdomv>
</attr>
</detailed>
</eainfo>
<spatRepInfo>
<VectSpatRep>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
<geometObjs Name="view_sg_intermediatezone_2011_bdry">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">1279</geoObjCnt>
</geometObjs>
</VectSpatRep>
</spatRepInfo>
<mdStanName>ArcGIS Metadata</mdStanName>
<mdStanVer>1.0</mdStanVer>
<spdoinfo>
<ptvctinf>
<esriterm Name="view_sg_intermediatezone_2011_bdry">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">1279</efeacnt>
<spindex Sync="TRUE">FALSE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
</metadata>
